Can you print your own hydro dip film?
Can you print your own hydro dip film?
In general, there are 3 types of inkjet inks that will work for printing your own hydrographics: solvent, latex, and pigment-based. Some to AVOID are dye-based and sublimation, along with laser printers inks.
What type of film is used for hydro dipping?
Polyvinyl Alcohol (PVA) film
The film used in hydro dipping produces a quality and custom finish for any OEM parts. Special inks are printed onto a large roll of Polyvinyl Alcohol (PVA) film. This clear film is water-soluble, which means it will start to break down when floated on water and the activator chemical is applied.
What is the activator for hydro dipping?
The activator is a chemical that liquefies the ink on the hydro dip film. After you have primed the object and painted it, the item is ready for the film. Hydrographic films are made from polyvinyl alcohol. The film is carefully placed on the water surface of a dipping tank.
What equipment is needed for hydro dipping?
The hydro dipping can be achieved out of the paint booth. However, during the spraying of the activator (100% solvent based), the room must have sufficient air circulation. Equipment needed: A sanding station, a spray gun and a compressor, a suitable dipping tank, and supports to hold the parts during dipping.
Is there money in hydro dipping?
Hydro dipping fees for guns typically range from $200 to $500, depending on the make and model. Gun accessories cost $50 to $200 to hydro dip. The average cost for hydro dipping a smaller object, such as cups starts at $30. Unusual items, such as water skis and wakeboards, usually cost $150 to $300 to hydro dip.
Do you clear coat after hydro dipping?
Clear coating is highly recommended for all hydrographically decorated parts. This helps to seal in the inks and allows for a cleaner finished product. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.
What materials do you need for hydro dipping?
Hydrographic designs require no special printing equipment, and you can use any material that can withstand being submerged in water, such as ceramics, plastics, metal, and fiberglass. You can also hydro dip wood, but you should exercise caution because the process may warp the wood if you do not use a sealer primer.
What kind of paint is best for hydro dipping?
The 7 Best Paints For Hydro Dipping
- Rust-Oleum Metallic Spray Paint. Oil-based spray paint, metallic finish.
- Krylon ColorMaster Paint. Paint + primer spray, gloss finish.
- Castle Art Supplies Fabric Paint Set. 24 3D fabric paints.
- Marabu Easy Marble (Rose Pink)
- Flash Acrylic Paint Set.
- Neon Nights UV Paint Set.
Is hydro dipping permanent?
Hydrographics, otherwise known as Hydro dipping, is paint based printing process. Once your item is painted and hydro dipped, they are protected with an automotive grade clear coat, whilst this is a permanent change, if you ever did change your mind, you could simply paint over it.
Do You Use warm or cold water for hydro dipping?
The ideal water temperature range for hydrographic dipping is 80 to 90 degrees Fahrenheit. Some dip manufacturers may recommend a specific temperature, such as 80 degrees.