Do they make 8-foot pickets?
Do they make 8-foot pickets?
This pressure treated pine fence picket is a classic choice for fence building, because of its dog ear style top. Use it to create a customized fence with your favorite paint or stain. Or, use it to replace a damaged board. This picket stands 8-ft tall, and is 5/8-in thick by 5-1/2-in wide.
How far apart should fence slats be?
The fence boards alternate on the sides of the rails, overlapping by at least 1 inch on each side of the boards. Thus, 6-inch fence boards would be spaced approximately 3 1/2 inches apart, since the actual width of a 6-inch board is 5 1/2 inches.
What size do fence pickets come in?
Pickets are the vertical members of a wood fence. Pickets can be installed tight to each other or with a space between them. Typically, pickets are 3 1/2″ wide, 5 1/2″ or as much as 11 1/2″ wide, if you are going to use dimensional kiln-dried lumber.
What size are fence boards?
At Discount Fence USA, we use (actual size) ¾” and ⅝” thick wood for our fence boards (pickets). These boards are often referred to as 1x6x6’s and are the standard size used by almost every fence company.
What size Post do you use for an 8 foot fence?
A common rule of thumb, is to dig the hole 3 times as large as the post, and to a depth of 1/3-1/2 of the post height above ground. so for a 8′ high fence, using 4×4 posts. dig the holes 12″ in diameter, to a depth of 2 1/2 – 4′. Of course, that’s assuming you’re setting the posts in concrete.
Should fence boards be tight together?
Horizontal Fence Boards If you’re installing the boards horizontal, you’ll want to leave 1/4 in -1 inches of space between the boards. For privacy purposes, get the boards as close together as you can. If it’s impossible to do that, or you’re worried about shrinking and expanding, leave 1/8 inch between each board.
Can you double board a fence?
Most commonly, you will have to have a rail or two to strengthen the fence panels and to attach pales to. With doubled sided fence panels the rails are concealed within the panel allowing the same design on both sides.
How wide are fence planks?
Typically, pickets are 3 1/2″ wide, 5 1/2″ or as much as 11 1/2″ wide, if you are going to use dimensional kiln-dried lumber. This includes most treated pine boards. We use CCA treated or red cedar boards.