Does Molex to 8 pin work?
Does Molex to 8 pin work?
Yes, using an adapter is safe.
Is 8 pin enough for GPU?
If you’ve recently purchased a top-class GPU, it will likely require an 8-pin connector, which some PSUs might not have. In that case, the 6-pin to 8-pin adapter is the solution for you.
Is it safe to use Molex to PCIe?
You need Two Molex Connectors for One PCIe Power Connector. Yes, but connect them to different “legs” or cables from the PSU, otherwise you may melt the wiring from the PSU if you put them on the same line.
Is 8 pin and 8 pin GPU the same?
8-pin GPU has 3x12v, 3x ground, and two “sense”/ground. Meanwhile, 6-pin GPU has 3x 12v, 2x ground, 1x sense/ground. A CPU 8-pin has 4x 12v, and 4x ground. Each has 12v on “opposite” pins, and are keyed differently, so confusing the two should be pretty easy…
How much watts can Molex handle?
The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector.
Is Molex power safe?
Molex to SATA adapter cables are a very simple and cost-effective alternative to buying a new power supply. However, they can be a dangerous alternative to getting a quality power supply, potentially damaging your SSD, internal components, and may also pose a fire risk in your home.
How many pins does a RTX 3080 have?
The GeForce RTX 3080, rated for 320W, makes do with a pair of 8-pin PCIe power connectors.
Can 8 pin GPU run on 6 pin?
Nope, it would not work. The card can ‘sense’ that only 6 pin plug has been used and will refuse to start.
Is it safe to use Molex to 6-pin for GPU?
Now if you’re sure that the PSU’s rail connected to the MOLEX 12v is properly rated and can supply enough current to the graphics card, and you’ve got an adapter that’s appropriately sized (meaning sufficient gauge thickness of wire, and the adapter only is wired to terminate at the 12v line), then it’s fine.
Can I use a 6 pin on a 8 pin GPU?
Nope, it would not work. The card can ‘sense’ that only 6 pin plug has been used and will refuse to start. Adapters are bad idea – risk of causing fire.
Can I plug CPU cable for GPU?
You can safely power your GPU from the CPU connector, since it will not exceed its power specification. You can also power a GPU that takes 8pin+6pin from a single CPU connector. You should not connect two 8pin PCIE to one CPU connector though, since this will exceed the power rating (150+150 = 300).