How do I reset my HP switch password?
How do I reset my HP switch password?
Solution: You can clear the switch password by pressing the recessed Clear button on the front of the switch. This action deletes all password and user name protection from all of the switch’s interfaces.
How do I factory reset my HP switch?
Solution:
- Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to blink, release the Clear button.
How do I factory reset my HP 1910?

Restore to factory default configuration….HP V1910-48G JE009A Factory reset – Password recovery capability enabled.
- Connect switch cable to COM.
- Open Putty on COM 38400 – 8 – 1 – N.
- Powercycle the switch.
- Press Ctrl-B at boot to enter extended boot menu.
- Skip current system configuration.
- Reboot.
What is the default password for HP switch?
The default username for first time configuration is admin, no password is required.
How do I factory reset my HP 1920 switch?
To execute the factory default reset on the switch, perform these steps:

- Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
- Continue to press the Reset button until the Fault LED light begins to flash.
- Release the Reset button.
How do I reset my HP A5120 to factory settings?
Unable to restore HP A5120 switch to factory
- Download application file to flash.
- Select application file to boot.
- Display all files in flash.
- Delete file from flash.
- Restore to factory default configuration.
- Enter bootrom upgrade menu.
- Skip current configuration file.
- Reserved.
How do I reset my HPE switch 1950?
Options 5, 7 and Ctrl+P can be helpful in reseting the switch or logging in without a password. After bypassing console authentication you can use the command initialize the perform the factory reset.
How do I log into my HP switch?
On the computer connected to the new HP Switch you need to: Open a browser software, enter the IP address of your Switch and access the HP Switch web interface. On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed.
How do I setup my HP 24g Switch 1920?
Initial configuration
- Place the switch close to the PC that will use for configuration.
- Connect power to the switch, and then start the PC (If it is not already running) and wait until the switch and PC have finished their start-up sequences.
- Connect the PC to any port on the switch using a standard Ethernet LAN cable.
How do I reset my HPE Switch 1950?
How do I restore my HP 2910 to factory settings?
To execute the factory default reset on the switch, perform these steps:
- Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
- Continue to press the Clear button while releasing the Reset button.
- When the Self Test LED begins to blink, release the Clear button.
How do I reset my HP ProCurve 2510 24?
How to reset a ProCurve 2510-24g to default settings
- Press in both the Clear and Reset buttons (tiny buttons on the left edge)
- Release the Reset button after the port lights come on (~2 seconds)
- When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.