How do you drain a Kenmore 800 washer?
How do you drain a Kenmore 800 washer?
Squeeze the locking pin on the end of the drain hose that is connected to the back of the washer if you will be draining the water into a floor drain. Pull the hose away from the washer to disconnect it. The water will pour out as soon as the hose is disconnected.
Why is my Kenmore washer not draining completely?
If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
How do you empty a washing machine full of water?
How to drain a washer filled with water
- Try the spin cycle.
- Turn off the power and water supply.
- Remove and check the drain hose.
- Check to see if it will drain with the help of gravity.
- Check your machine’s inner workings.
- Check the drain pipe.
- Drain manually if needed.
- Call a service professional.
How do you drain a Kenmore?
There are multiple ways to drain your Kenmore washer manually, but the simplest way is to remove the drain hose. Locate the drain hose (you’ll find it behind the washer), pinch the pin locking it to the appliance, then slowly pull off the hose. Afterward, the water will pour onto the floor.
How do you check a coin trap on a washing machine?
If your washer has a coin trap, you will see a small, square panel near the floor on the front or side of the machine. Open the door and remove the trap by turning it counterclockwise and pulling. The contents of the trap may surprise you.
What would cause my washer not to drain?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
How often replace washer drain hose?
about every three to five years
Whether they’re made of black rubber or stainless steel, washer hoses need to be replaced about every three to five years. If it’s been that long, or if the hoses are showing signs of wear, it can be easy to replace them if you follow these simple steps: Turn off the water supply.