What does it mean when the printer says Replace imaging unit?
What does it mean when the printer says Replace imaging unit?
When a imaging unit has reached the end of life, the machine will stop printing. To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes.
How do I change my imaging unit?
Replacing the imaging unit
- Open the front cover, and then remove the toner cartridge.
- Pull the imaging unit straight out using the groove.
- Remove the new imaging unit from the packaging.
- Before inserting the new imaging unit, make sure to remove the protective plastic tab.
Why is my Samsung printer flashing red?
If a corresponding LED is solid red, along with a blinking red status light, check the following: A small amount of toner might remain in the toner cartridge. A minor error might have occurred.
Is imaging unit same as toner?
The toner cartridge contains several components including the color pigment used to create letters and images. The imaging drum is the unit that transfers the toner to paper by following the principles of electrophotography. Not all laser printer models require both toner cartridge and imaging drums.
Is imaging unit the same as toner?
Why is my Samsung printer not printing?
The machine may be configured incorrectly. Check the Printing Preferences to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Uninstall and reinstall the machine’s driver.
How often do imaging drums need to be replaced?
Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.
How do I reset my Samsung Xpress printer?
- Power the printer off completely.
- While the power is off, simultaneously hold down the Menu>, Go, and Select buttons.
- While still holding down the buttons, power the printer back on. Release the buttons when Restoring Factory Defaults appears on the display.
- Allow the printer to warm up as normal.