What does SMD 5050 mean?
What does SMD 5050 mean?
Simply put, these LED chips are called SMD 5050 because the dimensions of the chips are 5.0mm x 5.0mm. They have 3 LED diodes in one housing (sometimes called tri-chips), and are a lot brighter than individual 3528 LED chips.
Is 5730 LED good?
Making the 5630 (5730) LED the brightest of all 3 with the lowest power consumption per watts. The wider angle makes it easy to emit a brighter output with the same wattage.
Which is brighter LED 5050 or 5630?
5630 SMDs have dimensions of 5.6mm x 3.0mm. A larger LED doesn’t always mean brighter – but in this case, the 5630 chip outputs far more light than the more common 5050 SMD. High-quality 5630 chips on 60 LED p/m tape can produce up to around 2700 lumens.
Which is better SMD or LED?
One of the biggest improvements is that SMD spotlights offer a higher lumen output for a lower energy consumption – making them more powerful and energy efficient than older LED lights. This is because they work on the principle that fewer and larger SMD LEDs produce a greater lumen output.
Which SMD is the brightest?
5050 SMD CHIP They are much brighter than 3528 LED unless as previously mentioned, they are on more than a 600 reel. Due to 5050 LED chips being generally brighter than 3528 chips, they are often used for lighting certain areas that require a greater output of light.
What is the difference between SMD and LED?
Power LED bulbs or downlights usually contain 3 or 4 high powered LED chips which combine to create a focused beam of light, usually with a 25 or 40 degree beam angle. SMD LED bulbs are made up of a cluster of very small LED chips, usually around 20 per bulb.
Which LED chip is the best?
Therefore 5050 LED chips are better for RGB and 3528 as used better for the single colour applications. These are best used for general lighting applications including corridor lighting, restaurants, hotels and replacement of fluorescent tube lighting.
Is SMD brighter than LED?
Brightness But among different types of LED, the lumen differs. For example, SMD, it applies 50 to 100 lumen per watt, while the lowest measure of COB is 80 lumen per watt, higher than that of SMD. Therefore, lights with COB are brighter.