What is infield mix soil?
What is infield mix soil?
The infield mix is the soil used to build the skin surface of a baseball or softball field. Infield mixes are made up of three components: sand, silt, and clay. Sand is considered the largest soil particle in the infield mix.
How deep should infield mix be?
Lucky Beaver Professional Infield Mix should be put down to a depth of 3” – 6” on a standard infield renovation. Once laid evenly, we suggest watering your infield with ½ inch of water, rolling it with a 1000 pound roller to achieve proper compaction, and then laser grading it out at 1/2%.
How many yards of infield mix do I need?
Baseball – Skinned Infield Area & Infield Mix Needed
Area of Skinned Infield | Dirt Needed for 1″ Depth | |
---|---|---|
70′ Bases Grass Infield | 6,800 sq ft | 21 yds |
70′ Bases Skinned Infield | 10,700 sq ft | 33 yds |
60′ Bases Grass Infield | 3,850 sq ft | 12 yds |
60′ Bases Skinned Infield | 6,700 sq ft | 21 yds |
What is the best dirt for a baseball infield?
The ideal dirt for recreational baseball and softball infields is composed of 70% sand and 30% silt and clay combined. Professional and collegiate level fields typically prefer 60% sand and 40% silt and clay.
What is infield mix made of?
The infield mix—what most of us would think of as just dirt—is made up of a very precise combination of sand, silt, and clay, and comes in a variety of colors and compositions depending on the performance required and the cost.
How do you make an infield mix?
We have all heard the numbers, an infield mix should be 70% sand, and 30% evenly split between silt and clay. Without a true particle size analysis you may think you have plenty of clay content, but you may actually be playing on silt.
How do you soften infield dirt?
Option 2: Fill a straight sided jar half full of your infield mix. Fill with water and shake vigorously until the soil is suspended in the water. Set aside and let it stand until the mix has fully settled. This will take from 1 hour to overnight.
How much does infield mix weigh?
The clay weighs approximately 2500 lbs per yard. Add This item cannot be shipped.
What is a skinned infield?
Every skinned infield is comprised of three unique components: Sand, Silt, and Clay. Understanding the characteristics of each component goes a long way toward helping with the management of a baseball or softball field. Sand, for example, is going to drain very well but will have a tendency to be loose or shifty.
What kind of dirt is in a baseball infield?
For a typical, or so-called low-maintenance, nonprofessional infield, the components consist of a mix of 70 percent sand, 15 percent clay, and 15 percent silt. For Major League Baseball, the infield mix is a bit different: 55 percent sand, 30 percent clay, and 15 percent silt.
How do you firm an infield?
One remedy may be to add light layers of heavier clay soil and mix into the the soil profile until the right mix is achieved. Every year or two it may be necessary to till the infield. This will bring some of the clay back to the surface. This process will help the surface to firm up.