What is RIP v2?
What is RIP v2?
The Routing Information Protocol, version 2 (RIPv2) is an enhanced version of RIP that includes support for important routing features such as class-less addressing and variable-length subnet masks [37]. RIPv2 is a distance-vector protocol that has been in use for many years.
What is the difference between RIPv1 and RIP v2?
RIP v1 is an older, no longer much used routing protocol. RIP v2 is a classless protocol and it supports classful, variable-length subnet masking (VLSM), CIDR, and route summarization. RIPv2 supports authentication of RIPv2 update messages (MD5 or plain-text).
How do I connect RIP to EIGRP?
Route Redistribution between RIP and EIGRP
- Step 1:Assign ip address on router interfaces.
- Step 2:Configure RIP Routing on R1:
- Step3: configure RIP and EIGRP on Router r2:
- Step4: configure EIGRP on Router R3:
- Step 5: Redistribute RIP Routes in to EIGRP on R2.
- Step 6:Redistribute EIGRP Routes in to RIP on R2.
What is difference between EIGRP and RIP?
In Routing Information protocol (RIP), the maximum number of Hop is 15, because it prevents routing loops from source to destination….Difference between RIP and EIGRP :
SR.NO | RIP | EIGRP |
---|---|---|
6. | It allow maximum hop count upto 15. | It allow maximum hop count upto 255. |
7. | It’s administrative distance is 120. | It’s administrative distance is 90. |
Is RIP v2 still used?
RIPv2 was first described in RFC 1388 and RFC 1723 (1994); the current RFC is 2453, written in November 1998. Although current environments use advanced routing protocols such as OSPF and EIGRP, there still are networks using RIP.
What is RIPv1 in networking?
RIPv1 stands for Routing Information Protocol version 1. It uses Classful routing. The regular routing updates do not carry subnet details and do not support Variable Length subnet masks (VLSM). This is the drawback of RIPv1, due to which it is not possible to have various sized subnets in the same network class.
Why is RIPv2 better than RIPv1?
RIPv1 uses classful routing. The periodic routing updates do not carry subnet information, lacking support for variable length subnet masks (VLSM)….Differences between RIPv1 and RIPv2 :
SR.NO | RIPv1 | RIPv2 |
---|---|---|
5. | It does not support for VLSM and discontinuous networks. | It supports for VLSM and discontinuous networks. |
6. | It is less secure. | It is more secure. |
Which RIP version should I use?
RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you have an unusual network setup. RIP-2 carries more information.
Which protocol works if RIP and EIGRP are configured together why?
We will use RIP and EIGRP together and merge them to get the benefits of Distance vector and Link State. So when you use both RIP and EIGRP together then the most accurate metrics to determine the best path to destination automatically get changed with change in network topology.
What is EIGRP in networking?
Enhanced Interior Gateway Routing Protocol (EIGRP) is a network protocol that enables routers to exchange information more efficiently than earlier network protocols, such as Interior Gateway Routing Protocol (IGRP) or Border Gateway Protocol (BGP).
What is difference between RIP EIGRP and OSPF?
EIGRP is based on DUAL (Diffusing Update Algorithm) while OSPF uses Dijkstra’s Shortest Path Algorithm with the major difference in how they calculate the shortest routing path.
What is RIP EIGRP OSPF BGP?
RIP, EIGRP and OSPF are all interior gateway protocols (IGP) while BGP is an exterior gateway protocol (EGP). Basically, interior protocols are meant to dynamically route data across a network that you fully control and maintain.