What is the best way to mount E-track?
What is the best way to mount E-track?
Expert Reply: You can mount the E-Track Trailer Cargo Control, # EM59150, using wood screws if the mounting surface is wood. If it is sheet metal, I would use sheet metal screws. Basically, match the screw with the material you are mounting to.
What size screws mount E-track?
If you choose screws, you’ll need #12 or #14 screws. If you’re using bolts, use ¼” bolts. Screws should be long enough to get a grip in the stud, but not too long to puncture the outer skin of the trailer.
What is the difference between vertical and horizontal e track?
Vertical e-track has slots that run parallel with the track, whereas horizontal e-track has slots that run perpendicular. Both have their pros and cons depending on what you may be hauling.
Is E track stronger than L track?
When deciding between the two systems consider your purpose and what you’re trying to secure. L-Track is light, sleek and can be coordinated with the paint on your truck or trailer. E Track is stronger, heavier and much more industrial. Both will work inside of a trailer — just consider what you were trying to do.
What does a #8 screw mean?
Diameter is given as a one or two digit number for smaller sizes, and as a fraction for larger sizes. In all cases, the larger the number, the larger the size. Consequently a #8 screw is larger than a #4 screw, just as a 3 inch bolt is larger than a 2 inch bolt.
Can you cut E-track?
The Erickson Horizontal E-Track # E19148 can be cut to length for your application. We suggest using a metal saw or cutting wheel and grinder to cut the tracks to the needed length.
Are all e track rails the same?
E Track rails are available in a variety of different lengths in both Vertical E Track and Horizontal E Track varieties. Some of the most common lengths of E Track rails are 2′, 5′, 8′, and 10′ being the longest piece of E Track rails.
Will E track hold a car?
Expert Reply: Yes, the Erickson Horizontal E-Track part # E19148 will be plenty strong enough to secure your two rock crawler buggies. The tracks are each rated at 6,000 lbs max break strength and 2,000 working load limit.
Is a #8 or 10 screw bigger?
Machine screws are often found in sizes of: 0, 1, 2, 3, 4, 5, 6, 8, 10, 12, 14—the larger the number, the larger the screw.