What is the typical density of steel?
What is the typical density of steel?
7.85 g/cm3
Plain steel’s density is about 490 pounds per cubic foot, which can also be expressed as 7.85 g/cm3.
What is the density of high yield steel?
7.80 – 8.00 g/cc
Physical Properties | Metric | English |
---|---|---|
Density | 7.80 – 8.00 g/cc | 0.282 – 0.289 lb/in³ |
Mechanical Properties | Metric | English |
Hardness, Brinell | 121 | 121 |
Hardness, Knoop | 140 | 140 |
What is the density of high carbon steel?

7.54 g/cc
Vendors:
Physical Properties | Metric | Comments |
---|---|---|
Density | 0.451 – 8.26 g/cc | Average value: 7.54 g/cc Grade Count:375 |
Particle Size | 6.70 – 12.0 µm | Average value: 9.27 µm Grade Count:4 |
Mechanical Properties | Metric | Comments |
Hardness, Brinell | 163 – 600 | Average value: 260 Grade Count:235 |
What is the density of stainless steel LB in3?
0.285
Type 304 (S30400), Type 304L (S30403) in Coil Form
Property | 304/304LData |
---|---|
Density, lb/in3 | 0.285 |
Modulus of Elasticity, psi | 28 x 106 |
Coefficient of Thermal Expansion, 68-212˚F, /˚F | 9.2 x 10-6 |
Thermal Conductivity, Btu/ft hr ˚F | 9.4 |
What does high yield steel mean?
High yield steel grade S890QL is an exceptional structural steel with high strength values in both quenched and tempered conditions.

What is ultra high strength steel?
Ultra-High Strength Steel (UHSS) is specially formulated steel with a tensile strength above 780 MPa. AHSS with a tensile strength of at least 1,000 MPa is often called “GigaPascal steel” (1000 MPa = 1GPa).
What is composition of alloy steel?
Alloy steel is a type of steel alloyed with several elements such as molybdenum, manganese, nickel, chromium, vanadium, silicon, and boron. These alloying elements are added to increase strength, hardness, wear resistance, and toughness. The amounts of alloying elements may vary between 1 and 50%.
What is the density of 316 stainless steel?
7.99 g/cm3
Grade 316 is the standard molybdenum-bearing grade, second inoverall volume production to 304 amongst the austenitic stainless steels….Physical Properties (Room Temperature)
Specific Heat (0-100°C) | 500 | J.kg-1.°K-1 |
---|---|---|
Modulus Elasticity | 193 | GPa |
Electrical Resistivity | 7.4 | μohm/cm |
Density | 7.99 | g/cm3 |
What is the density of 304 stainless steel?
8,000 Kg/m3
Stainless steel 304 and stainless steel 304L are also known as 1.4301 and 1.4307 respectively. Type 304 is the most versatile and widely used stainless steel….Physical Properties.
Property | Value |
---|---|
Density | 8,000 Kg/m3 |
Melting Point | 1450 °C |
Thermal Expansion | 17.2 x 10-6 /K |
Modulus of Elasticity | 193 GPa |
How much does steel weigh per pound?
One cubic inch of steel weighs 0.283 pounds. So, a 1″ square piece of steel 1 foot long weighs (1 X 1 X 12 X . 283) or about 3.4 pounds.