What is Xlate command?
What is Xlate command?
The -XLATE command specifies whether to use the default Sterling Connect:Direct® translation table. This command is optional. If you omit it, the adapter does not specify the XLATE option on the SUBMIT command.
How do you use the clear Xlate command?
Use the clear xlate command to clear all connections (clear xlate clears all connections, not just those with translation sessions). clear xlate also enforces the PC side to flush its databases allowing the system to remain in sync. You can alternatively use the clear local-host command to clear connections per host.
What is Xlate Cisco?
It basically means “translation” as in NAT translation. So the pix/ASA keeps an xlate table which you can view and this is a record of all NAT translations done by the firewall. Dynamic and static NAT translations are entered into the xlate table but dynamic entries will eventually time out if not used and be removed.
What is NAT exemption?
NAT exemption allows you to exclude traffic from being translated with NAT. One scenario where you usually need this is when you have a site-to-site VPN tunnel.
What is the difference between identity NAT and NAT exemption?
According to the Cisco ASA: All-in-One Firewall, IPS, and VPN Adaptive Security Appliance book, “The main difference between identity NAT and NAT exemption is that with identity NAT, the traffic must be sourced from the address specified with the nat 0 statement, whereas with NAT exemption, traffic can be initiated by …
What is a NAT 0?
NAT0 is used in certail situation like if NAT is not needed. By default all the internal IP addresses are nated to the external interface’s IP address in ASA/Firewall. If yopu want to remove this condition for certain IP addresses/Subnet use NAT0.
What is the use of identity NAT?
You would use Identity NAT when you want to traffic from your inside interface to flow through to your outside interface without changing the address. An example scenario would be a private MPLS cloud with separate clients. Each client has a unique address space so NATing is not necessary.
What is a NAT 1 DND?
Natural 1 – For an attack roll, results in an automatic miss.