What pad do you use with V38?
What pad do you use with V38?
V38 is quite light: white or even blue Lake Country pads are a good choice. Do a section and check: the question is whether that will be aggressive enough, depending on the problems in the paint. If it’s not, move to a black or orange pad.
How do you use V36 Chemical guys?
Turn on machine on paint to speed setting 1 to spread product. Increase speed to 5-6 and using moderate pressure, work area in 2-3 passes until product becomes clear. Follow with light pressure to finish. Remove residue with a clean microfiber towel.
Can I use V36 on glass?
V36 will only remove very light water spots with calcium build up. V36 will not remove any scratches from glass.
How do I apply for V38?
- Shake well and apply 4-5 drops to desired pad.
- Prime pad with Pad Conditioner.
- Turn on machine away from paint to a setting in between 1000-1500 rpms to spread product.
- Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear.
Does V38 remove swirls?
V38 super polish is the first water-based OEM approved polish that is capable of removing light paint defects by delivering perfect results permanently without filling in or covering up. Optical grade micro abrasives rapidly eliminate imperfections and remove 2500-3000 grit sanding scratches, swirls and holograms.
What Pad do I use with chemical guys VSS?
For heavy scratches and swirls, use the Orange Hex-Logic buffing pad. For medium scratches and swirls, use the Green Hex-Logic buffing pad. For light scratches and swirls, use the White Hex-Logic buffing pad.
How long should a 1 step polish take?
a one step max should take no longer than 4 hours, If im going into the 4 hour or more range, I am going to do a less thorough 2 step, 1 buffing cycle with compound and then follow behind it with a all in one polish to clean up the haze and leave protection.
Can I apply VSS by hand?
You will be amazed at the level of optical clarity in the finish and VSS can be used by hand, or via buffer. This polish is water based, body shop safe, and OEM approved.
Does VSS remove clear coat?
The innovative swirl remover restores a lustrous scratch-free finish without filling in or covering up swirls, scratches, or defects. VSS Scratch & Swirl Remover delivers a perfect finish in less time while being equally effective on single stage, ceramic finishes, and clear coat paints.
What is a 2 step polish?
A 2 stage polish is, as the name might give away, a combination of polishing steps that is made up out of 2 steps. When you are going to polish an area, you want to minimize the difference in dept between the surface itself en the maximum depth of a surface imperfection.
How often should I machine polish my car?
The Quick Answer. You should only ever machine polish a car when necessary to avoid removing an excess of clear coat. You can use a paint depth gauge to determine how thick the paint is, and if it’s safe to polish it. It’s normally safe to use a machine polish on a brand new car twice before running into issues.