When should a plume management kit be used?
When should a plume management kit be used?
1 states: “Plume management kits shall only be used when provided or specified by the appliance manufacturer. They shall be installed such that the resulting chimney outlet is in accordance with Table C. 2 and Figure C.
What is the maximum length for a Worcester boiler flue?
Add the following to length (L) to check the maximum flue length is not exceeded: 2000mm for each extra 90° bend. 1000mm for each extra 45° bend.
What is the maximum length for a boiler flue?
All of Baxi’s, Main’s and Potterton’s system or combi boilers with a 60/100mm concentric flue fitted can be up to a maximum length of 10 metres. If you find that you do need a longer flue run, then the flue size can be increased to 80/125mm, giving you a maximum flue length of up to 20 metres.
What is a plume kit regulations?
Plume Management kits used in carports The air intake must have a minimum 150mm clearance to any opening in the building in order to ensure the integrity of the structure is maintained. If the exhaust terminates within the footprint of the carport then the carport must have at least two sides completely open.
How do I know if my boiler is condensing?
How to tell; If you have a white plastic pipe coming out of the bottom of your boiler you have one of these. Another way to tell is your flue (exhaust) if this is plastic it’s a condensing high efficiency boiler, if it’s all metal a non condensing boiler.
What is a plume management kit?
The Plume Management Kit, with a diameter of 60mm, allows you to direct the plume in any direction you want, meaning you can avoid potentially intrusive areas such as neighbouring properties or doors and windows.
How long does a flue pipe need to be?
Building Regulations recommend a flue system of at least 4.5m in length to achieve this. An added benefit of attaining a certain height with your flue system is the improved draw this will create.
How long can a boiler flue be Worcester?
Age Verification With no cutting required, the flue measures 350mm in length but can be extended up to 570mm in total allowing for more flexible installation.
Can you use an old flue on a new boiler?
Yes, you do need to replace the flue when replacing any boiler even if the same brand. This is to keep it in line with manufacturers specifications and Building regulations. The washers on the combustion side of the flue (inner section) perish over time and can leak and cause damage to the rest of the flue.